An introduction to sampling methods

Published on September 19, 2019 by Shona McCombes. Revised on December 6, 2021.

When you conduct research about a group of people, it's rarely possible to collect data from every person in that group. Instead, you select a sample. The sample is the group of individuals who will actually participate in the research.

To draw valid conclusions from your results, you have to carefully decide how you will select a sample that is representative of the group as a whole. There are two types of sampling methods:

  • Probability sampling involves random selection, allowing you to make strong statistical inferences about the whole group.
  • Non-probability sampling involves non-random selection based on convenience or other criteria, allowing you to easily collect data.

You should clearly explain how you selected your sample in the methodology section of your paper or thesis.

Population vs sample

First, you need to understand the difference between a population and a sample, and identify the target population of your research.

  • The population is the entire group that you want to draw conclusions about.
  • The sample is the specific group of individuals that you will collect data from.

The population can be defined in terms of geographical location, age, income, and many other characteristics.

Population vs sampleIt can be very broad or quite narrow: maybe you want to make inferences about the whole adult population of your country; maybe your research focuses on customers of a certain company, patients with a specific health condition, or students in a single school.

It is important to carefully define your target population according to the purpose and practicalities of your project.

If the population is very large, demographically mixed, and geographically dispersed, it might be difficult to gain access to a representative sample.

Sampling frame

The sampling frame is the actual list of individuals that the sample will be drawn from. Ideally, it should include the entire target population (and nobody who is not part of that population).

Example

You are doing research on working conditions at Company X. Your population is all 1000 employees of the company. Your sampling frame is the company's HR database which lists the names and contact details of every employee.

Sample size

The number of individuals you should include in your sample depends on various factors, including the size and variability of the population and your research design. There are different sample size calculators and formulas depending on what you want to achieve with statistical analysis.

    Probability sampling methods

    Probability sampling means that every member of the population has a chance of being selected. It is mainly used in quantitative research. If you want to produce results that are representative of the whole population, probability sampling techniques are the most valid choice.

    There are four main types of probability sample.

    Probability sampling

    1. Simple random sampling

    In a simple random sample, every member of the population has an equal chance of being selected. Your sampling frame should include the whole population.

    To conduct this type of sampling, you can use tools like random number generators or other techniques that are based entirely on chance.

    Example

    You want to select a simple random sample of 100 employees of Company X. You assign a number to every employee in the company database from 1 to 1000, and use a random number generator to select 100 numbers.

    2. Systematic sampling

    Systematic sampling is similar to simple random sampling, but it is usually slightly easier to conduct. Every member of the population is listed with a number, but instead of randomly generating numbers, individuals are chosen at regular intervals.

    Example

    All employees of the company are listed in alphabetical order. From the first 10 numbers, you randomly select a starting point: number 6. From number 6 onwards, every 10th person on the list is selected (6, 16, 26, 36, and so on), and you end up with a sample of 100 people.

    If you use this technique, it is important to make sure that there is no hidden pattern in the list that might skew the sample. For example, if the HR database groups employees by team, and team members are listed in order of seniority, there is a risk that your interval might skip over people in junior roles, resulting in a sample that is skewed towards senior employees.

    3. Stratified sampling

    Stratified sampling involves dividing the population into subpopulations that may differ in important ways. It allows you draw more precise conclusions by ensuring that every subgroup is properly represented in the sample.

    To use this sampling method, you divide the population into subgroups (called strata) based on the relevant characteristic (e.g. gender, age range, income bracket, job role).

    Based on the overall proportions of the population, you calculate how many people should be sampled from each subgroup. Then you use random or systematic sampling to select a sample from each subgroup.

    Example

    The company has 800 female employees and 200 male employees. You want to ensure that the sample reflects the gender balance of the company, so you sort the population into two strata based on gender. Then you use random sampling on each group, selecting 80 women and 20 men, which gives you a representative sample of 100 people.

    4. Cluster sampling

    Cluster sampling also involves dividing the population into subgroups, but each subgroup should have similar characteristics to the whole sample. Instead of sampling individuals from each subgroup, you randomly select entire subgroups.

    If it is practically possible, you might include every individual from each sampled cluster. If the clusters themselves are large, you can also sample individuals from within each cluster using one of the techniques above. This is called multistage sampling.

    This method is good for dealing with large and dispersed populations, but there is more risk of error in the sample, as there could be substantial differences between clusters. It's difficult to guarantee that the sampled clusters are really representative of the whole population.

    Example

    The company has offices in 10 cities across the country (all with roughly the same number of employees in similar roles). You don't have the capacity to travel to every office to collect your data, so you use random sampling to select 3 offices – these are your clusters.

    What is your plagiarism score?

    Compare your paper with over 60 billion web pages and 30 million publications.

    • Best plagiarism checker of 2021
    • Plagiarism report & percentage
    • Largest plagiarism database

    Scribbr Plagiarism Checker

    Non-probability sampling methods

    In a non-probability sample, individuals are selected based on non-random criteria, and not every individual has a chance of being included.

    This type of sample is easier and cheaper to access, but it has a higher risk of sampling bias. That means the inferences you can make about the population are weaker than with probability samples, and your conclusions may be more limited. If you use a non-probability sample, you should still aim to make it as representative of the population as possible.

    Non-probability sampling techniques are often used in exploratory and qualitative research. In these types of research, the aim is not to test a hypothesis about a broad population, but to develop an initial understanding of a small or under-researched population.

    Non probability sampling

    1. Convenience sampling

    A convenience sample simply includes the individuals who happen to be most accessible to the researcher.

    This is an easy and inexpensive way to gather initial data, but there is no way to tell if the sample is representative of the population, so it can't produce generalizable results.

    Example

    You are researching opinions about student support services in your university, so after each of your classes, you ask your fellow students to complete a survey on the topic. This is a convenient way to gather data, but as you only surveyed students taking the same classes as you at the same level, the sample is not representative of all the students at your university.

    2. Voluntary response sampling

    Similar to a convenience sample, a voluntary response sample is mainly based on ease of access. Instead of the researcher choosing participants and directly contacting them, people volunteer themselves (e.g. by responding to a public online survey).

    Voluntary response samples are always at least somewhat biased, as some people will inherently be more likely to volunteer than others.

    Example

    You send out the survey to all students at your university and a lot of students decide to complete it. This can certainly give you some insight into the topic, but the people who responded are more likely to be those who have strong opinions about the student support services, so you can't be sure that their opinions are representative of all students.

    3. Purposive sampling

    This type of sampling, also known as judgement sampling, involves the researcher using their expertise to select a sample that is most useful to the purposes of the research.

    It is often used in qualitative research, where the researcher wants to gain detailed knowledge about a specific phenomenon rather than make statistical inferences, or where the population is very small and specific. An effective purposive sample must have clear criteria and rationale for inclusion.

    Example

    You want to know more about the opinions and experiences of disabled students at your university, so you purposefully select a number of students with different support needs in order to gather a varied range of data on their experiences with student services.

    4. Snowball sampling

    If the population is hard to access, snowball sampling can be used to recruit participants via other participants. The number of people you have access to "snowballs" as you get in contact with more people.

    Example

    You are researching experiences of homelessness in your city. Since there is no list of all homeless people in the city, probability sampling isn't possible. You meet one person who agrees to participate in the research, and she puts you in contact with other homeless people that she knows in the area.

    Frequently asked questions about sampling

    What is sampling?

    A sample is a subset of individuals from a larger population. Sampling means selecting the group that you will actually collect data from in your research. For example, if you are researching the opinions of students in your university, you could survey a sample of 100 students.

    In statistics, sampling allows you to test a hypothesis about the characteristics of a population.

    What is non-probability sampling?

    In non-probability sampling, the sample is selected based on non-random criteria, and not every member of the population has a chance of being included.

    Common non-probability sampling methods include convenience sampling, voluntary response sampling, purposive sampling, snowball sampling, and quota sampling.

    What is multistage sampling?

    In multistage sampling, or multistage cluster sampling, you draw a sample from a population using smaller and smaller groups at each stage.

    This method is often used to collect data from a large, geographically spread group of people in national surveys, for example. You take advantage of hierarchical groupings (e.g., from state to city to neighborhood) to create a sample that's less expensive and time-consuming to collect data from.

    Is this article helpful?

    You have already voted. Thanks :-) Your vote is saved :-) Processing your vote...